Charcoal Embers; Vermiculite (Model Gd36 Only); Glowing Embers; Logo Placement - Napoleon GD36NTR Instructions D'installation Et D'opération

7.4

CHARCOAL EMBERS

Randomly place the charcoal embers along the front and sides of the log support tray in a realistic manner.
Fine dust found in the bottom of the bag should not be used.
NOTE: Charcoal embers are not to be placed on the burner.
7.5

VERMICULITE (MODEL GD36 ONLY)

Sprinkle vermiculite around the charcoal embers.
NOTE: Vermiculite is not to be placed on the burner.
7.6

GLOWING EMBERS

Tear the embers into pieces and place along the front row of ports covering all of the burner area in front of
the small logs. Care should be taken to shred the embers into thin, small irregular pieces as only the exposed
edges of the fi bre hairs will glow. The ember material will only glow when exposed to direct fl ame;
however, care should be taken to not block the burner ports.
Blocked burner ports can cause an incorrect fl ame pattern, carbon deposits and delayed ignition. PHAZER
logs glow when exposed to direct fl ame. Use only certifi ed "glowing embers" and PHAZER
from your authorized dealer / distributor.
7.7

LOGO PLACEMENT

Remove the backing of the logo supplied and place on the glass viewing door,
as indicated.
32.1
33.1
TM
logs available
TM
½"
(12.7mm)
LOGO
½"
(12.7mm)
97.1A
W415-0773 / F / 08.26.13
45
EN