Maintenance/Repairs/Cleaning; Maintenance; Repairs; Cleaning - Minebea Intec Load Cell S PR 6241 Manuel D'installation

Compression Load Cell S-Type PR 6241
9

Maintenance/Repairs/Cleaning

9.1

Maintenance

9.2

Repairs

9.3

Cleaning

Minebea Intec
The load cell PR 6241 is maintenance-free.
Corrosion protection grease must be applied to the mounting parts of the load cell.
Of-shore all-weather protection spray can be applied extensively to the load cell in
aggressive environments.
The load cell PR 6241 is designed to be as robust as possible for the required measuring
accuracy and is highly reliable. Should an electrical or mechanical defect nevertheless
occur, the load cell must be replaced.
Load cell repair is not possible.
Dirt on the load cell and movable parts of the scale must be cleaned as quickly as possible
-
if it inluences weighing, or
-
if it is corrosive to the cell or cable material.
NOTICE
Some cleaning agents may not be compatible with the load cell material.
When using cleaning agents, ensure that their compatibility with the load cell
material has been tested and approved (see Chapter 4.2).
9 Maintenance/Repairs/Cleaning
EN-22