Selecting Maximum Capacity - Minebea Intec Load Cell S PR 6241 Manuel D'installation

Compression Load Cell S-Type PR 6241
3.3

Selecting maximum capacity

Minebea Intec
Assembly:
-
Mount the threaded bar (1) so that it has suicient free moving space in the drill hole.
-
Lock the nuts (2) so that there is a remaining distance A* from the washer (3).
* A = 2 mm
This distance is essential to avoid force shunts.
If there is a risk of the safe load limit E
falling loads), mechanical limiting in load direction is required or an appropriate rubber
damping mechanism must be provided (elastomer support see Chapter 11.2.1).
being exceeded (even only temporarily, e.g. by
lim
3 Design recommendations
EN-8