CAMPAGNOLO SUPER RECORD CHORUS Mode D'emploi page 35

Note
In order to minimize the possibility of
damaging the chain irreparably, DO NOT
TIGHTEN the tool beyond the beat. Let
Internal side
the bushing ULTRA-LINK 5-CN-SR600 (E)
of the chain
protrude 0.1 mm from the inner side of the
chain (Fig. 13).
• Insert the protruding part of the guide
into the hole provided at the base of the
tool and split it by bending (Fig. 14).
E
E
0,1 mm
The terminal part of the split guide must
always remain inside the bushing.
13
• Remove the clamping device and remo-
ve the chain from the tool.
14
ENGLISH 35