CAMPAGNOLO SUPER RECORD CHORUS Mode D'emploi page 32

5.4 - INSERTING THE BUSHING ULTRA-LINK 5-CN-SR600
• Remove the plastic band and the adhesi-
ve "Warning" label.
• To assembly the closing pin ULTRA-LINK
5-CN-SR600, place the chain on the bot-
tom bracket shell.
• Insert the inner link (B - Fig. 6) into the
outer link (C - Fig. 6), and then insert the
drive part of the union bushing ULTRA-LINK
5-CN-SR600 (D - Fig. 6) into the hole of the
link from the inside of the chain towards
the outside.
11s
NO!
5-CN-RE500
• Move the chain on to the larger chainring
(keeping it on the smallest sprocket), then
position the links to be closed in the area
indicated in Figure 7.
32
12s
OK!
5-CN-SR600
D
External side of the chain
6
7
B
C
ENGLISH