Manitowoc NEO UD0140A Manuel D'instructions page 15

Touch Pad Features
The touch pad offers a series of pressure sensitive
buttons to control ice machine operation and provide
operational status.
On/Off - Blue = Machine On
Off = Machine Is Off
Delay - Blue = Delay Mode On
Off = Delay Mode Is Off
Clean - Yellow = Clean Cycle On
Flashing = Clean Cycle Paused
Off = Cleaning is Off
Bin Full - Blue = Bin Is Full
Off = Bin Is Not Full
Service - Red = Safety Limit
Off = Doesn't Need Service
ON/OFF
The On/Off Button is used to start and stop ice making.
The blue light indicates whether the ice machine is in Ice
Making (light on) or Off (light off).
NOTE: If ice is on the evaporator (during the freeze or
harvest cycle) and the On/Off button is pressed; the next
cycle will have a thick slab of ice. Press the On/Off
button and allow the ice to melt off the evaporator, then
start a new freeze cycle.
Part Number 040002909 Rev01 4/15
Section 3
Operation
DELAY
Pressing the Delay button will start a delay period. The
ice machine will finish the freeze and harvest cycle and
then start the delay period.
• Pressing the button once will start a 4 hour delay
period.
• Pressing the button twice will start a 12 hour delay
period.
• Pressing the button three times will start a 24 hour
delay period.
• Pressing the button four times will cancel the delay
periods.
NOTE: The delay period will be canceled if power is
interrupted to the ice machine. When power is restored,
the ice machine will remain Off.
CLEAN
Pressing the Clean button for 3 seconds with the
machine off will start a clean cycle. After the clean cycle
is complete, the ice machine will automatically start an
ice making cycle.
• Pressing the Clean button again within 45 seconds of
the clean cycle starting will abort the clean cycle.
• Pressing the On/Off button anytime during the Clean
cycle will de-energize the On/Off LED and the ice
machine will stop after the Clean cycle is complete.
• Pressing the Clean button will pause the Clean cycle.
The On/Off and Clean lights will flash on/off to
indicate pause mode. Pressing the Clean button
again will continue the Clean cycle from the point of
interruption.
NOTE: Opening the ice damper for 30 seconds will
cancel the clean cycle.
BIN FULL
The Bin Full light energizes when the bin is full or is de-
energized if the bin is not full.
SERVICE
The service light indicates the machine needs attention.
• Refer to Section 5 for more information if this light is
energized.
13