Patek Philippe 240 Q Mode D'emploi page 13

1. preparations
Start by manually winding the movement (max.
10 turns of the crown) to get it going before
proceeding with any other setting or correction.
Advance the hands with the crown until the
24-hour hand (in the subsidiary dial at 9 o'clock)
points at 6 o'clock.
/
2. setting correcting the date
Repeatedly press the push piece between 11 and
12 o'clock until the correct date is displayed on
the subsidiary dial at 6 o'clock.
/
3. setting correcting the leap year cycle
and the month
Repeatedly press the push piece between 12 and
1 o'clock until the subsidiary dial at 3 o'clock
displays the correct year (4 represents the leap
year) and the correct month. Leap year cycles
can be found in the Full Moon and Leap Year Calendar
brochure delivered with your watch.
/
4. setting correcting the day of the week
If the day-of-week display at 9 o'clock does not
correspond with the date, repeatedly press the
push piece at 9 o'clock until the correct day
appears on the subsidiary dial at 9 o'clock.
/
5. setting correcting the moon phase
The moon-phase display can be advanced in
steps of 24 hours by pressing the push piece at
6 o'clock all the way in.
13