Patek Philippe 240 Q Mode D'emploi page 12

12
WINDING CROWN
The winding crown is used to wind the watch
(position 1) and to set the time (position 2).
Push piece
for date correction
Push piece for day-
of-week correction
Push piece for moon-
phase correction
NOTES ON CORRECTING CALENDAR DISPLAYS
– Use only the correction stylus delivered with
your watch to press the push pieces. Any other
tool could damage the case.
– Do not perform any calendar corrections
between 3 p.m. and 2 a.m. During this period, the
mechanisms that change the displays are active
and could be damaged by manual interventions.
– All settings and corrections must be performed
in the specified order.
INSTRUCTIONS
Push piece for month
and year correction
1 2
Position 1:
Winding
Position 2:
Setting the time