Ct-400 Signal Clamp (Optional Accessory For The At-6010) - Amprobe AT-6010 Mode D'emploi

2. KIT COMPONENTS
2.3 CT-400 Signal Clamp
(optional accessory for the AT-6010)
The Signal Clamp accessory is used for applications when where is no access to the bare
conductors. The clamp attachment enables the Transmitter to induce a signal through the
insulation into either wires. The clamp works on low impedance closed circuits.
JAW
TACTILE
BARRIER
JAW
RELEASE
TEST LEAD
Figure 2.3: Overview of CT-400 Signal Clamp
9
CONNECTORS TO
TRANSMITTER