Operating The Lawn Mower; Holding And Guiding The Lawn Mower; Setting The Cutting Height - Stihl RM 2.1 R Notice D'emploi

11 Operating the Lawn Mower

11 Operating the Lawn Mower

11.1 Holding and Guiding the Lawn Mower

► Hold the handlebar with both hands so the thumbs
enclose the handlebar.

11.2 Setting the Cutting Height

Four cutting heights can be set:
– 30 mm = position 1
– 50 mm = position 2
– 70 mm = position 3
– 85 mm = position 4
The cutting height is set separately at the front and rear. The
cutting height setting must be identical at the front and rear.
0478-111-9949-A
Setting the rear cutting height
► Press the rear axle downwards.
The rear axle is released and can be adjusted.
► Move the rear axle into the desired position on the left and
right.
English
41