Aqua Medic M-ventil Eco Mode D'emploi page 5

3. Operation with timer
The CO –consumption during the day (light phase) is determined primarily by the plants. In the night (dark
2
phase), the plants excrete CO
harmful. The solenoid valve can be linked to a timer to meet these specific requirements. An elegant solution is
to connect the solenoid valve to the timer that controls the light. The valve is then switched on and off together
with the light.
4. Operation with pH controller
This operation mode should be preferred in comparison to others. It is the most exact and economic version.
Only the exact quantity required is fed into the system. It balances the loss that is, for example, caused by
water movements and aeration. Fluctuations of the pH-values are avoided by an electronic control. This is an
advantage for the creation of a well-balanced environment.
The solenoid valve is not suitable for water. The maximum pressure must not exceed 1 bar.
5. Warranty conditions
AB Aqua Medic GmbH grants the first-time user a 24-month guarantee from the date of purchase on all material
and manufacturing defects of the device. Incidentally, the consumer has legal rights; these are not limited by
this warranty. This warranty does not cover user serviceable parts, due to normal wear & tear. The original
invoice or receipt is required as proof of purchase. During the warranty period, we will repair the product for
free by installing new or renewed parts. This warranty only covers material and processing faults that occur
when used as intended. It does not apply to damage caused by transport, improper handling, incorrect
installation, negligence, interference or repairs made by unauthorized persons. In case of a fault with the
unit during or after the warranty period, please contact your dealer. All further steps are clarified
between the dealer and AB Aqua Medic. All complaints and returns that are not sent to us via
specialist dealers cannot be processed. AB Aqua Medic is not liable for consequential damages resulting
from the use of any of our products.
AB Aqua Medic GmbH - Gewerbepark 24 - 49143 Bissendorf/Germany
–gas. So it is not necessary to provide CO
2
- Technical changes reserved – 06/2021/v4
1. Body of the valve
2. Magnetic reel
3. Power cord
4. CO -inlet
2
5. CO -outlet
2
during the night time, it may even be
2
5