Wall Clearances; Positioning The Tank - Buderus SM80/5 Notice D'installation Et D'entretien

5
Installation
5.1.2

Wall clearances

15-¾ inch
(102 mm)
(400 mm)
Fig. 7 Recommended minimum wall clearances
5.1.3

Positioning the tank

▶ Unpack the tank by removing the wrap, wooden boards and foam pad
on the top.
▶ Lay the foam pad on the floor to serve as a mat.
Fig. 8 Unpacking the DHW tank
▶ Carefully lay the tank on the foam pad [1].
▶ Cut out the protections in the foam bottom [2].
10
4 inch
6 720 800 155-10.1ITL
6 720 647 567-05.1ITL
▶ Unscrewing the adjustable foot[3].
1.
2.
Fig. 9 Lay the DHW cylinder on its side and expose the adjustable foot
SM80/5, SM100/5 – 6 720 800 156 (2014/10)
3.
6 720 647 567-35.1ITL