Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
6.3.5 Using sub-addresses
GB
If you use sub-addresses, you will be able to con-
trol up to 66 spotlights (spotlight groups) independ-
ently of each other via a single DMX start address.
Thus, the maximum number of DMX-controlled
units can be considerably higher. The spotlights
with a sub-address are selected via the DMX chan-
nel 8. All spotlights with a sub-address can also be
controlled in sync when the DMX channel 8 is set to
a DMX value less than 10.
1) Adjust the spotlight for the control of 8 DMX
channels,
2) Press the button MENU repeatedly until the
indication on the display does not change any
more.
3) Press the button
play shows
4) Press the button ENTER. The display now
shows
and a number between 01 and 66.
5) Adjust the sub-address with the button
6) Press the button MENU so that the display only
shows
again.
7) Press the button
shows
.
8) Press the button ENTER. The display goes to
the indication
9) If
is not shown, press the button
many times as necessary.
10) Press the button ENTER. If the display shows
, the sub-address function is activated. If it
shows
, change to
or
.
▼
11) For DMX control of the spotlight it is necessary
to go from the menu branch
tion of the start address:
a) Press the button MENU repeatedly until the
display shows
b) Press the button
display shows
c) Press the button ENTER. The display shows
the DMX start address. If now DMX control
signals are received, a dot on the display
flashes.
12) For operation of the spotlight set the DMX chan-
nel 8 at the light controller to the DMX value cor-
responding to the sub-address of the spotlight
(fig. 5).
14
chapter 6.3.2.
or
repeatedly until the dis-
▲
▼
.
once so that the display
▲
,
,
or
.
with the button
to the indica-
again.
or
repeatedly until the
▲
▼
.
DMX
value
000 – 009
010 – 019
020 – 029
030 – 039
040 – 049
050 – 059
060 – 069
070 – 079
080 – 089
090 – 099
100 – 109
110 – 119
120 – 129
130 – 139
140 – 149
or
.
▲
▼
150 – 159
160 – 169
170 – 179
180 – 189
190 – 199
200 – 209
210
or
as
▲
▼
211
Selection of spotlights with a sub-address
via DMX channel 8
▲
6.4 Automatic display switch-off
Activate the automatic display switch-off if the dis-
play is not to light up permanently but for 15 sec-
onds only after a button is pressed.
1) Press the button MENU repeatedly until the
indication on the display does not change any
more.
2) Press the button
play shows
3) Press the button ENTER. The display goes to
the indication
4) If
many times as necessary.
5) Press the button ENTER. The display shows the
present adjustment:
:
Select the adjustment with the button
6) Then switch back to the desired operating mode
with the operating buttons.
Sub-
DMX
Sub-
address
value
address
all
01
212
23
02
213
24
03
214
25
04
215
26
05
216
27
06
217
28
07
218
29
08
219
30
09
220
31
10
221
32
11
222
33
12
223
34
13
224
35
14
225
36
15
226
37
16
227
38
17
228
39
18
229
40
19
230
41
20
231
42
21
232
43
22
233
44
or
repeatedly until the dis-
▲
▼
.
,
,
is not shown, press the button
: The display lights up permanently.
The display only lights up after a button is
pressed.
DMX
Sub-
value
address
234
45
235
46
236
47
237
48
238
49
239
50
240
51
241
52
242
53
243
54
244
55
245
56
246
57
247
58
248
59
249
60
250
61
251
62
252
63
253
64
254
65
255
66
or
.
or
as
▲
▼
or
.
▲
▼
Publicité
Table des Matières
