ASSEMBLY INSTRUCTIONS
STEP 1
Fit the Front Stabilizer (F) to the Main Frame (B)
and secure it with 2 of M8xP1.25x55L Carriage
Bolts (I-1), 2 Flat Washers (I-2), and two Nuts (I-
3). Make sure they are securely tightened.
STEP 2
Fit Pedal Holder (E) to the Main Frame (B) and
secure it with 4 M8xP1.25x20L Screws
(I-4) and 4 Flat Washers (I-2).
Remarks: Do not screw one set of the
M8xP1.25x20L Screws and Flat Washers too
tightly at one time. It is better to fix the four sets
firmly at the same time to allow you to change
angles and to level easily.
Register your product warranty online at: www.BHFitnessUSA.com
TM
11
Questions regarding warranty and parts call: 636.634.2217