Care And Maintenance; Technical Specifications - Kärcher WD 2 Manuel D'utilisation

Finish operation
Illustration
 Turn off the appliance and disconnect the mains
plug.
Empty the container
Illustration
 Remove the appliance head and empty the reser-
voir.
Storing the appliance
Illustration
 Stow away the mains cable and accessory at the
machine. Store the appliance in a dry room.

Care and maintenance

 Clean the appliance and accessory parts made of
plastic with a commercial plastic cleaner.
 If required, rinse the container and accessories
with water properly and dry them before reuse.
Illustration
 When necessary, clean the foam or cartridge filter
under running water only, do not wipe or brush
down. Allow to dry completely prior to installation.
Special accessories
You can install a cartridge filter instead of a foam filter.
 Prior to installing the cartridge filter, remove the
black cover cap and keep it for later use with the
foam filter.
 Insert the cartridge filter and lock it with a bajonet
lock.
Troubleshooting
Decreasing cleaning power
If the cleaning power of the appliance deteriorates
please check the following:
 Accessories, suction hose or suction pipes are
clogged, please remove the obstruction using a
stick.
 Filter bag is full, install new filter bag.
 Foam filter is contaminated, clean it under running
water.
 Cartridge filter is dirty, knock off dirt from cartridge
filter and clean under running water if necessary.
 Replace damaged filter.
12

Technical specifications

Mains voltage
1~50-60 Hz
Mains fuse (slow-blow)
Container capacity
Water intake with handle
Water intake with floor
nozzle
Output P
nom
Power cord
Weight (without accesso-
ries)
Sound pressure level (EN
60704-2-1)
Subject to technical modifications!
– 8
EN
220 - 240 V
10 A
12 l
5,5 l
3,0 l
1000 W
H 05VV-F2x0,75
4,5 kg
77 dB(A)