Filter Coffee Maker; Making Coffee; Setting The Time For A Preprogrammed Start - Krups XP2280 Manuel D'utilisation

FILTER COFFEE MAKER

Before first use
Operate the coffee maker for the first time with 1 litre of water, without coffee ground, by filling the
tank and pressing the
IMPORTANT
The quality of the water you use determines the taste of your coffee.
You must ensure that the water is freshly drawn from the tap (so that it has not
had the time to stagnate in the air), that it does not smell of chlorine and that it is
relatively cold.
We recommend that you filter your water using a Krups Duo Filter, reference XS 1000, avai-
lable in shops, to be placed in the container provided (D) which is fitted in the coffee maker
water tank.
Use a no. 4 paper filter.

MAKING COFFEE

Fill the water tank depending on the number of cups you want (Fig. 25).
Do not exceed the maximum capacity of the water tank as shown by the water level indicator.
Lift the lid by pressing the OPEN button (Fig. 26).
Place a paper filter in the filter holder and fill it with ground coffee using the measuring spoon at the
rate of one spoon per cup of coffee (Fig. 27).
Your appliance is equipped with an aroma selector: this system allows you to obtain a normal coffee
or a more strongly flavoured coffee
preprogrammed mode or for immediate use (Fig.28).
Coffee
Press the button on the coffee maker, the
The cycle is complete and your coffee is ready when you hear 3 beeps.
The coffee maker is fitted with a drip-stop device, allowing you to serve coffee before the water has
finished running through. If you serve yourself a coffee during the cycle, replace the jug quickly to
avoid overflow.
The jug and its lid can be used for warming up coffee in the microwave.
Never put the empty jug in the microwave.

SETTING THE TIME FOR A PREPROGRAMMED START

Press the "PROG" button
The pictogram
flashes; you must set your coffee start time using the "H" and "m" button within 5
seconds; otherwise press the "PROG" button again.
When the time is set, press the "PROG" button to confirm the setting.
Your selection is confirmed, and the display switches back to "clock" mode.
Press the "PROG" button at any time to check the time you have programmed.
PREPROGRAMMED START
To activate this function, press the "AUTO" button; the cycle will start automatically at the
programmed time.
You will hear 3 beeps when the cycle is complete.
CLEANING
To dispose of the used grounds, lift the filter holder out of the coffee maker
Unplug the appliance.
Coffee button on the filter coffee maker.
. Press the button to select the strength of the coffee in
Coffee
LED glows, and the cycle starts.
English English
101