Krups XP2280 Manuel D'utilisation page 100

Masquer les pouces Voir aussi pour XP2280:
Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 1
5. DESCALING
The guarantee does not cover appliances which become faulty because they have not been descaled re-
gularly.
Descale your espresso machine using white vinegar (available from hardware stores) or a sachet of com-
mercial citric or sulfamic acid.
We recommend that you use the Krups descaling accessory, reference F054, available in Krups au-
thorised service centres. In addition to two descaling sachets, this accessory includes a water hardness
tape tester to assess the frequency with which your appliance should be descaled, in normal use. The amount
of scale depends on the hardness of the water but also the level of use.
The frequency of descaling given by the F054 accessory is therefore purely indicative.
Av. number of
coffees per week
Less than 7
From 7 to 20
Over 20
If in doubt, it is recommended to descale every month
DESCALING THE STEAM AND ESPRESSO CIRCUIT
Empty the tank and put it back in place.
If your appliance is fitted with our Claris - Aqua Filter System F088 cartridge, please remove this
cartridge before the descaling operation.
Fill the tank with a mixture composed of three parts of water for one part of white vinegar or a mixture
of 1/2 litre of water and a sachet of commercial descaling agent.
Insert the filter holder (without ground coffee) into the appliance and lock it by turning it to the right,
up to the stop.
Place a container under the steam nozzle.
Press the
Espresso
. button. During the preheating of the appliance, the
Once it becomes steady, turn the knob to
equivalent of a mug) and then turn the knob back to "0" position.
Place a container of sufficient volume under the filter holder.
When the LED becomes steady, press the
repeating this operation.
Turn off the appliance by pressing the
After 15 minutes, turn the appliance back on.
Press the
Espresso
button. During the preheating of the appliance, the
becomes steady, make the rest of the mixture run through into a container by pressing the
button several times.
RINSING
IMPORTANT !
After descaling, perform 2-3 rinsing operations with clean water (without es-
presso ground coffee), as described in paragraph 1 "Before first use".
Remember to rinse the steam circuit by following the instructions below:
Place a container under the steam nozzle.
Press the
Espresso
button (fig.4).
DESCALING FREQUENCY
Soft water
(<19°th)
Once a year
Every 8 months
Every 4 months
Every 3 months
Every 3 months
Every 2 months
position and let 100 ml of this mixture flow through (the
, button and let the water flow through before
Espresso
button immediately after this second cycle.
Hard water
Very hard water (
(19-30°th)
Every 6 months
Every 2 months
Every month
Espresso
LED flashes.
Espresso
English
English
30°t)
LED flashes. When it
97

Publicité

Table des Matières
loading

Table des Matières