Top Panel - Global Controls - Numark iDJ2 Guide D'utilisation

TOP PANEL - GLOBAL CONTROLS

The global controls on the iDJ² allow you to access and navigate many of the unit's features, such as the
Library, the Crate, and various other options.
1. LCD – The large color
screen displays information
about the iDJ², the decks,
your attached
media and different menu
options.
2. PUSH TO ENTER – This
knob is used to navigate
lists, change settings, and
operate various parts of the
User Interface.
pressed to select or change
the highlighted item, when
appropriate.
3. LIBRARY – This button
allows you to access the
library of music stored on
the removable
connected to
Please refer
"Navigating the
section of this manual for
more information on how to
browse and load music from
your removable media.
4. CRATE – This button allows you to view the "Crate". Any tracks that you send to the Crate will appear
in this list. While you are viewing the Crate, you can use the FUNCTION buttons below the screen to
send tracks to either deck for mixing, pull them back into the Crate for later use if they are already
playing, or remove them from the Crate altogether. You may also switch the track order in the Crate, if
you would like, by pressing and releasing the PUSH TO ENTER knob on a track and then rotating the
knob– this will move the selected track up or down in the list. Then push and release ENTER again to
accept the new position. Please see "The Crate" section of this manual for more information on the
Crate feature.
5. VIEW – You may use this button to access different information about the music playing on the decks.
The VIEW button will toggle between Track View and Profile View. Please see "Views" section for
more information.
6. UTILITY – Pressing this button will take you to the Utility menu where you can adjust display
preferences, restore settings to their factory default state and calibrate the pitch sliders. Please see the
"Utility" section for details.
7. EJECT – Press this button to select which mass storage device you would like to eject. When you
press this button, you will see a list of the devices currently attached to the iDJ². Select which device
you would like to eject by rotating the PUSH TO ENTER knob and pressing the appropriate FUNCTION
button below the display to eject the highlighted device.
Please note: Always eject your devices before physically removing them from the iDJ². If you
fail to eject a device before removing it, the data on the device may become corrupt and
unusable.
8. FUNCTION BUTTONS – These four buttons are used to select from available menu items displayed on
the screen. Depending on the menu that you are viewing, the functionality of these buttons will change.
The screen will display the function of the button directly above it.
9. < / > BUTTONS – These two buttons are used to scroll through available pages of selections, when
available. If there are additional pages to be viewed, the arrow segments above the buttons will be
highlighted. These buttons are also used to move the cursor when entering text.
removable
It can be
media
the iDJ².
to the
Library"
9