Top Panel - Mixer Controls - Numark iDJ2 Guide D'utilisation

TOP PANEL - MIXER CONTROLS

iDJ² sports a full-featured DJ mixer which can be used to mix audio from USB mass storage devices and
iPod players, as well as any additional input devices, such as CD players and turntables connected to the
RCA inputs on the rear of the unit.
Each mixer channel features an
input selector. The input selector
switch (DECK/LINE) will select
which signal is being routed to the
mixer panel:
•
In Deck position (in), the
mixer channel will output the
audio from an attached iPod
or USB mass
devices. Tracks can be
"sent" to the virtual deck via
the menus on the screen.
•
In Line position (out), the
mixer channel will output the
audio signal from the RCA
inputs on the rear of the unit
(CD player, turntable, etc.)
Whichever option you choose, you
will be able to use familiar DJ
controls (gain, EQ,
volume and crossfader) to create
your mixes.
Each mixer channel features:
13. INPUT SELECTOR (DECK/LINE) – Selects the input of the channel (DECK = USB device or iPod, LINE
= external source through RCA input).
14. GAIN – Adjust the overall gain of the audio signal on the channel.
15. BASS – Adjusts the low (bass) frequencies of the audio signal on the channel.
16. MID – Adjusts the mid frequencies of the audio signal on the channel.
17. TREBLE – Adjusts the high (treble) frequencies of the audio signal on the channel.
18. VOLUME FADER – Adjusts the volume of the audio signal on the channel.
Also on the top panel you will see:
19. CROSSFADER – Fades the audio signal between channels A and B.
20. MASTER LEVEL KNOB – Controls the output level of the master mix.
21. LEVEL METERS – Represent the Pre Fader or Program audio levels.
22. METER BUTTON – Toggles the level meters between displaying Pre Fader (PFL) or Program (PGM).
storage
metering,
11