Using Lists; Using Dialogs; Responding To Questions - Numark iDJ2 Guide D'utilisation

Using Lists

iDJ² makes extensive use of lists to give you fast access
to your tracks. Lists are displayed within the Work Area
and are navigated using the rotary PUSH TO ENTER
knob and the Menu Bar.
To move up and down through a list simply rotate the
PUSH TO ENTER knob. A highlight on screen indicates
which item is currently selected, and if the list is too long
to fit on screen all at once it will move up and down as
you rotate at the top or bottom of the Work Area. For
long lists a bar at the right of the Work Area shows how
much of the list you can see, and how far through the list
you are.
If the currently highlighted item is something that can be
selected simply push the PUSH TO ENTER knob. Other
options relating to the list or to the currently highlighted
item may appear in the Menu Bar.
The best way to get familiar with lists is to build and
experiment with a Library. See "The Library" section for
details.

Using Dialogs

A Dialog can appear in part or all of the Work Area and is used to provide information, to get a response, to allow you to
enter information or to change settings. Sometimes a Dialog may have its own Menu Bar, other times not. There will
always be a title so you know to what the Dialog refers.

Responding to Questions

When iDJ² needs to send you a message or ask you a question
it will do so with a Dialog. If a response is required the options
will appear in the Menu Bar.
answer the question and the Dialog will close, returning you to
whatever you were doing.
In this example, iDJ² is responding to the DJ's command to
clear all tracks from the Crate by checking if he is really sure.
Select the desired option to
19