Cable Assembly; Putting Into Operation - Abicor Binzel ABIROB A Mode D'emploi

6 Putting into operation

5.4 Cable assembly

The air-cooled cable assembly provides the welding torch with all the components required for
welding, e. g. the welding current, shielding gas and air.
6 Putting into operation
DANGER
Risk of injury due to unexpected start
The following instructions must be adhered to during all maintenance, servicing, assembly,
disassembly and repair work:
• Switch off the power source.
• Close off the compressed air supply.
• Close off the gas supply.
• Disconnect all electrical connections.
NOTICE
• Note the following instructions:
 3 Product description on page EN-5
EN - 10
®
ABIROB
BAL.0125 • 2019-04-15
A