Scope Of Delivery; Transport - Abicor Binzel ABIROB A Mode D'emploi

4 Scope of delivery

4 Scope of delivery
• Torch-side cable support with integrated
switch housing
• Operating instructions
The ABIROB
Additional, welding-task-dependent components are also required for the initial set-up.
These include the following:
• Torch neck (in the preferred size and
geometry)
• Equipment parts and wear parts (order separately)
Tab. 6
The cable assemblies for the ABIROB
lengths of 1 - 3.5 m as well as customer-specific lengths. For a complete system, you will require
an alignment jig. This must be separately ordered in line with the configuration.
Order the equipment parts and wear parts separately.
The order data and ID numbers for the equipment parts and wear parts can be found in the
current catalogue. Contact details for advice and orders can be found online
at www.binzel-abicor.com.

4.1 Transport

Although the items delivered are carefully checked and packaged, it is not possible to fully
exclude the risk of transport damage.
Goods inspection
In case of complaints If the delivery has been damaged during transportation, contact
Packaging for return Where possible, use the original packaging and the original
Tab. 7
4.2 Storage
Physical storage conditions in a closed environment:
 Tab. 2 Ambient conditions for transport and storage on page EN-5
EN - 8
®
A welding torch system will not function with the ROBO cable assembly.
Scope of delivery
Use the delivery note to check that everything has been
delivered.
Check the delivery for damage (visual inspection).
the last carrier immediately. Retain the packaging for potential
inspection by the carrier.
packaging material. If you have any questions concerning the
packaging and/or how to secure an item during shipment,
please consult your supplier.
Transport
• Machine-side cable support with central
connector
• Bracket (required for attachment to the
robot)
®
A welding torch system are available in standard
®
ABIROB
BAL.0125 • 2019-04-15
A