Robert Juliat Merlin 1515 Manuel page 12

• Protocol: Wireless Solution W-DMX™
• Refer to the OEM User's manual for general recommendations and
use of the transmitter:
• The antenna must be clearly visible from the transmitter
• See MENU for activation
• Do not connect a DMX IN data cable in case of wireless DMX use
• In case of protocol errors, the wireless DMX is automatically
deactivated. To activate the wireless DMX again, disconnect the
DMX IN data cable, and then switch the unit off and on.
• Installation: Remove the power supply from the followspot head.
Insert the W-DMX module into the slot.
Reconnect the power supply unit.
Wireless DMX option
http://www.wirelessdmx.com
EN - 10 -
EN