StarLab ErgoOne 2,5 Mode D'emploi page 19

Cleaning / changing the piston unit
• The piston unit
from the piston frame by turning
it with the Allen key (Fig. 11).
• The piston cylinder
up (Fig. 12) and the entire piston
unit can now easily be
20
removed from the front (Fig. 13)
and cleaned externally using an
alcoholic disinfectant. R e-
lubricate the piston with original
STARLAB piston grease (see
section 8 Ordering Information).
• The piston unit should not be
d isassembled. In the event of
d amage, it should be fully
replaced (see section 8 Ordering
Information for a replacement
piston unit).
• Reassemble the pipette in the
reverse order.
is released
18
is pushed
19
ErgoOne
Fig. 11
Fig. 12
Fig. 13
User Manual
®
19