Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
8449019
WORK AREA
1.
Operate in a safe work environment. Keep your work area clean, well lit and
free of distractions.
2.
Keep anyone not wearing the appropriate safety equipment away from the
work area.
3.
Store unused tools properly in a safe and dry location to prevent rust or
damage. Lock tools away and keep out of the reach of children.
4.
Do not install or use the engine in the presence of flammable gases, dust
or liquids.
PERSONAL SAFETY
WARNING! Wear personal protective equipment approved by the Canadian
Standards Association (CSA) or American National Standards Institute (ANSI).
PERSONAL PROTECTIVE EQUIPMENT
1.
Always wear impact safety goggles that provide front and side protection for
the eyes. Eye protection equipment should comply with CSA Z94.3-07 or ANSI
Z87.1 standards based on the type of work performed.
2.
Wear gloves that provide protection based on the work materials or to reduce
the effects of tool vibration.
a.
Do not wear gloves when operating a tool that can snag the material and
pull the hand into the tool.
3.
Wear protective clothing designed for the work environment and tool.
4.
Non-skid footwear is recommended to maintain footing and balance in the
work environment.
5.
Wear steel toe footwear or steel toe caps to prevent a foot injury from
falling objects.
PERSONAL PRECAUTIONS
Control the tool, personal movement and the work environment to avoid personal
injury or damage to tool.
4
420cc OHV Gas Engine with Electric Start
For technical questions call 1-800-665-8685
V 4.4
Publicité
Table des Matières
