CHT220/CHT220L
10. Storage
1. Oil the blade to prevent rust.
2. Empty the fuel tank and put the cap
back on.
3. Remove the spark plug, pour a small
amount of oil into the cylinder.
4. Rotate the crankshaft several times
using the starting rope in order to
distribute the oil. Put the spark plug
back in.
5. Wrap the engine with a plastic sheet.
6. Store the trimmer in a dry place,
preferably not in direct contact with the
floor and away from heat sources.
11. Disposal
• When disposing your machine, fuel or
oil for the machine, be sure to allow
your local regulations.
12. Troubleshooting guide
Case 1. Starting failure
fuel tank
fuel filter
carburetor adjustment screw
sparking (no spark)
spark plug
Case 2. Engine starts but does not keep running/Hard re-starting.
fuel tank
carburetor adjustment screw
muffler,cylinder (exhaust port)
air cleaner
cylinder fin, fan cover
When your unit seems to need further service, please consult with our service shop in your area.
US-18
CHECK
➞
➞
➞
➞
➞
➞
CHECK
PROBABLE CAUSES
➞
➞
➞
➞
➞
PROBABLE CAUSES
incorrect fuel
fuel filter is clogged
out of normal range
spark plug is fouled/wet
plug gap is incorrect
disconnected
incorrect fuel or staled fuel
out of normal range
carbon is built-up
clogged with dust
clogged with dust
ACTION
➞
drain it and with correct fuel
➞
clean
➞
adjust to normal range
➞
clean/dry
➞
correct (GAP: 0.5 mm)
➞
retighten
ACTION
➞
drain it and with correct fuel
➞
adjust to normal range
➞
wipe away
➞
wash
➞
clean