Safety; Staff Training; Risks Incurred By Failure To Comply With The Safety Precautions - Wilo TOP-S Notice De Montage Et De Mise En Service

Rp }
T
max
+50°C
+95°C
+110°C
+130°C
Rp }
T
max
+50°C
+80°C
+110°C
T
max
+50°C
+95°C
+110°C
+130°C
These values are valid up to 300 m above sea level. For higher elevations add 0.01 bar/100 m additional
height.

2. Safety

These operating instructions contain basic guideli-
nes to be followed for assembly and operation.
Furthermore, all of the special safety instructions
provided in the following sections must be followed.
2.1 Danger symbols used in these operating
instructions
Safety precautions in these operating instructions
which, if not followed, could cause personal injury
are indicated by the symbol:
with the following symbol used to indicate electri-
cal voltage:
Rp 1 Rp1[
0.05 bar
0.5 bar
1.1 bar
2.4 bar
Rp 1 Rp1[
0.5 bar
0.8 bar
2.0 bar
Rp 1
Rp1[
TOP-S/-SD
DN 32/40 DN 50
TOP-Z
DN 40 DN 50
TOP-D
DN 32/40 DN 50
0.05 bar
0.2 bar
0.8 bar
2.1 bar
The symbol below indicates that by ignoring the re-
levant safety instructions, damage could be caused
to the pump or installation:
2.2

Staff training

All operation, maintenance, inspection and assem-
bly staff must have the appropriate qualifications
for such work.
All personnel entrusted with assembly, commissio-
ning, operation, maintenance and inspection tasks
must read the operating instructions and in parti-
cular the chapter on "Safety" and ensure they have
fully understood them.
The operator must clearly define the areas of res-
ponsibility and supervision of staff.
2.3 Risks incurred by failure to comply with the
safety precautions
Failure to comply with the safety precautions could
result in personal injury or damage to the pump or
ENGLISH
DN 65 DN 80
0.3 bar
1.0 bar
1.6 bar
2.9 bar
DN 65
0.8 bar
1.0 bar
3.0 bar
DN 65
ATTENTION!
DN 100
DN 80
DN 80
0.3 bar
0.9 bar
2.2 bar
19