Guidance Information; About These Instructions; Original Instructions; Identification Of Safety Instructions - Wilo -Yonos MAXO Notice De Montage Et De Mise En Service

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 29
1

Guidance information

1.1

About these instructions

These instructions enable the safe installation and initial commis-
sioning of the pump.
ƒ
Read these instructions before commencing work and keep
them in an accessible place at all times.
ƒ
Observe instructions and labelling on the pump.
ƒ
Observe local regulations where the pump is installed.
ƒ
Follow the detailed instructions online.
➜ See QR code
1.2

Original instructions

The German language version represents the original instructions.
All other language versions are translations of the original instruc-
tions.
1.3

Identification of safety instructions

These installation and operating instructions set out safety instruc-
tions for preventing personal injury and damage to property, which
are displayed in different ways:
ƒ
Safety instructions relating to personal injury start with a signal
word and are preceded by a corresponding symbol.
ƒ
Safety instructions relating to property damage start with a sig-
nal word and are displayed without a symbol.
Signal words
ƒ
Danger!
Failure to observe safety instructions will result in serious injury
or death!
Installation and operating instructions Wilo-Yonos MAXO /-D/-Z
ƒ
Warning!
Failure to follow instructions can lead to (serious) injury!
ƒ
Caution!
Failure to follow instructions can lead to property damage and
possible total loss.
ƒ
Notice!
Useful information on handling the product
Symbols
These instructions use the following symbols:
General danger symbol
Danger of electric voltage
Warning of hot surfaces
Warning of magnetic fields
Notices
1.4

Personnel qualifications

ƒ
The product must be operated by persons who are instructed on
how the complete system functions.
ƒ
Installation/dismantling work: The installation/dismantling must
be carried out by a qualified technician who is trained in the use
of the necessary tools and fixation materials.
ƒ
Electrical work: Electrical work must be performed by a qualified
electrician.
en
17

Publicité

Table des Matières
loading

Table des Matières