Resetting The System - JVC NX-W5W Manuel D'instructions

Resetting the System

If the System cannot be oprated or the display
window is shown incorrectly, reset the System
using the following procedures.
After resetting, the contents of the settings will be
restored to the factory default.
1
Turn off the System.
Remote control
2
Resetting the System.
Remote control
–
Press and hold the two buttons at the same
time until "FACTORY RESET" is dsiplayed.
3
When "RESET FINISHED" is displayed,
unplug the AC power cord from the wall
socket.
The System have been reset.
4
Plug the AC power cord of the System into
the outlet.
Main unit
Main unit
and
41