Classification Key; Din En 1125 Panic Door Locks With; Ce Identification Marking - Forster 906443-448 Notice De Montage

Tab. 1 :
Classification key according
to DIN EN 1125
36
EN

Classification key

DIN EN 1125 panic door locks with horizontal push rod
The properties of panic door locks according to DIN EN 1125 are described via the ten-digit classification key.
Tab. 1 explains the classification key.
Class Meaning
3 High frequency of use, accompanied by little incentive for care, that is to say where the possibil-
ity of accident or misuse exists
7 200,000 test cycles
7 Door weight over 200 kg (300 kg)
B Suitable for use on fire and smoke protection doors on the basis of a test according to EN 1634-1
1 Suitable for critical safety function
3 High corrosion resistance in accordance with EN 1670:2007 Section 5.6
2 Refer to DIN EN 179, as this standard specifies higher requirements for break in protection
2 Approved for bar handles / pressure bar with an overhang up to 100mm (normal overhang)
A/B Panic door lock with
· A · Handle bar actuation
· B · Pressure bar actuation
B For installation in single-leaf doors (lock without unlocking pin)

CE Identification Marking

Notes