Din En 1125; Intended Use - Forster 906443-448 Notice De Montage

Intended use

The safety lock is approved for installation in one leaf Forster tubular frame doors (mandrel dimension 35 mm) made of
metal..
It is used to create a door lock. It is approved for safety and security areas and for use in emergency exit doors
according to DIN EN 179 and panic doors according to DIN EN 1125.
It is suitable for utilisation in fire doors (smoke protection doors). All applicable provisions for the approval of
protection doors must be adhered to.
The safety lock must only be built into faultlessly functioning door systems. All applicable provisions for the complete
door system must be adhered to.
The device is suitable for installation in accordance with assembly instructions and use according to the functional
description.
The safety lock is suitable for installation in doors with high frequency of use, accompanied by little incentive for care
where the possibility of an accident or misuse exists (for example in the case of office doors).
It is not intended for any other type of use.
EN
Notes 35