Assemble The Fittings And Locking Cylinder; Check The Safety Lock - Forster 906443-448 Notice De Montage

Fix the locking cylinder
with turnbuckle screw
Inspect for full
functionality
Fig. 5 :
Latch is free of transverse
loading after assembly
44
EN

Assemble the fittings and locking cylinder

1 Assemble the fittings.
2 Insert the locking cylinder and always thereby ensure that the locking cylinder closing nose is located in the middle
position (Fig. 13).
3 Fix the locking cylinder with the turnbuckle screw.
 The safety lock is fully assembled.
Check the safet y lock
1 Check all the functions of the safety lock.
2 Check whether the latch and control latch of the lock are pushed back from the same impact edge when closing
the door.
3 Check whether all latches move in and move out freely after assembly without transverse load (Fig. 5).
 The safety lock is completely assembled and checked for functionality.
Striking plate
F
= 0
Q
N
min. 2
F
= 0
Q
N
Face plate
Assembly