Tecno-gaz B-MAX Plus Mode D'emploi page 25

ENGLISH
1
The B-Max Plus LED curing light emits extremely high light waves and must only be used as
indicated in this manual.
lf using the B-Max Plus LED curing light in the Standard and high-power mode and in close
proximity of the gingival tissue. Do not expose tissue for more than 20 second. lf longer
curing ti me is required, consider a dual-cure product (composite or adhesive). In X-tra
power mode, Do not expose soft oral tissue for more than 9 seconds. The X-tra power mode
has a 2 second safety delay to limit oral tissue heating during consecutive curing. lf a longer
cure is needed. Consider a dual cure product (composite and adhesive).
Read all instruction before operating this unit. Do not look directly into the
light output Patient, clinician and assistants should wear UV orange eye
protection when this device is in use. Do not expose soft oral tissues at
close proximity. Maintain a safe distance between the lens and soft tissue.
2
INTRODUCTION