Disposal; Disposal Of Flat Batteries; Troubleshooting - VOLTCRAFT VC250 Notice D'emploi

Proceed as follows to charge at a grid power source (230 V/AC):
- Turn the DMM on and select measuring range "CHARGE".
- Plug the red measuring lead into the V measuring socket (7) and the black
measuring lead into the COM measuring socket (8).
- The display shows the symbol "CHARGE!" and the relative charge volt-
age. This ranges from -2.600 V (empty) to 3.999 V. If the high-cap is
loaded the display shows "OL". A charge time of 10 minutes is sufficient
for approximately 180 minutes measuring time in the DC V measuring
range.
- If the high-cap has been fully discharged and nothing appears in the dis-
play, press the "RESET" button (3) during charging. The DMM will be
reactivated.

Disposal

Old electronic devices are hazardous waste and should not be disposed of in the house-
hold waste. When the device has become unusable, dispose of it in accordance with the
current statutory regulations at the communal collection points. Disposal in the domestic
waste is not permitted.

Disposal of flat batteries!

As a consumer you are required (Battery Ordinance)to responsibly dispose of all used batteries and
rechargeable batteries;it is forbidden to throw them away with the normal household waste!
Batteries/rechargeable batteries containing harmful substances are marked with the fol-
lowing symbols, they point out that they are not allowed to be disposed of in the domestic
refuse. The symbols for dangerous heavy metal constituents are: Cd = cadmium, Hg =
mercury, Pb = lead. You can return used batteries/rechargeable batteries free of charge to
any collecting point in your local community, in our stores or in any other store where bat-
teries/rechargeable batteries are sold!
You thus fulfil the legal requirements and make your contribution to the protection
of the environment!

Troubleshooting

In purchasing the DMM, you have acquired a product which has been designed to
the state of the art and is operationally reliable.
Problems and malfunctions may, however, still arise.
For this reason, the following is a description of how you can eliminate possible
malfunctions yourself.
47