Swingline STACK-AND-SHRED 300X Mode D'emploi page 8

English
Stack and Shred 300X/300M shredding capability
Stack and Shred 300X/300M CAN shred the following:
• 300 sheets
• Stapled paper, 25mm within the corner
• 26/6 and 24/6 or smaller staples
• Small sized paper loaded centrally
• 300 sheets
• Paper clip paper, 25mm within the corner (300M through manual feed slot ONLY)
• Capable of shredding small/medium paper clips (max. wire thickness = 0.9 mm)
• >80/100gsm paper (through manual feed slot ONLY)
• A3 folded in half max. 2 sheets
• 300 sheets
• 80 gsm paper
- Letter and Legal
- A3 single sheet folded in half to make A4
Stack and Shred 300X/300M CAN shred (through the manual feed slot):
Thick paper or
card.
Unopened mail
(e.g. junk mail).
Stack and Shred 300X/300M CANNOT shred the following:
Heavy duty
staples. Check
the staple leg
length is not
greater than
6mm.
Bulldog clips
Adhesive labels.
8
register this product online at www.accobrands.com
Multiple folded
sheets (e.g. A3
sheets folded in
half).
Glossy paper or
a sheet covered
with print on both
sides.
Large clips.
Check the length
of the paperclip
is not longer than
32mm.
Bound
documents
Magazines or
other documents
bound by multiple
staples or clips.
Plastic sheets,
laminated
documents,
plastic folders.