Conservative Operating Mode - CASTELLINI SKEMA 6 CART Instructions De Service

5.5.1 CONSERVATIVE operating mode

Menu with micromotor withdrawn but not turned on.
• Press the left multifunction button (M1) to select one of the 4 programs
available.
• Press the MENU button to change the operating mode:
• Press the right multifunction button ( ) to go to the submenu used to
edit the operating data.
• Use buttons INCREASE and/or DECREASE to change the maximum
speed of the burrs.
The new value entered is automatically saved in the selected work program
(e.g. M1).
NOTE: use the fast selection buttons to automatically set the
following values:
- MAX button: 100% of the maximum allowable speed
- MED button: 50% of the maximum allowable speed
- MIN button: 1% of the maximum allowable speed
Menu with micromotor withdrawn and turned on.
• Press the left multifunction button (
maximum allowable one simultaneously selecting the ON/OFF variation
mode for the foot control switch.
NOTE: in order to quit this data item, go to the submenu used to
set the operating data and change the foot control switch over from ON/
OFF to linear speed variation mode.
• Press the MENU button to activate/deactivate an alarm signal once the
set maximum torque is reached.
The icon indicating the selected mode appears near the MENU button.
- icon : alarm active.
- icon .: alarm not active.
• Press the right multifunction button (
the maximum allowable one.
• Use buttons INCREASE and/or DECREASE to change the maximum
speed of the burrs.
Set up menu
Press the right multifunction button (
not turned on to go to the submenu containing the following icons which
indicate the settable functions:
Reduction ratio setting
Maximum torque variation setting
Speed variation mode
• Press the MENU button to scroll the icons until the desired function is
reached.
• Setting the reduction ratio
See paragraph 5.5.4.
• Setting maximum torque variation
Use buttons INCREASE and/or DECREASE to change the maximum
torque value that can be reached.
NOTE: use the fast selection buttons to automatically set the
following values:
- MAX button: 100% of the maximum allowable speed
- MED button: 50% of the maximum allowable speed
- MIN button: 1% of the maximum allowable speed
• Speed variation mode
Use buttons INCREASE and/or DECREASE to select the speed variation
mode:
- icon : linear variation, proportional to movement of the foot control
switch
- icon : ON/OFF variation. The set maximum power is delivered when
the foot control switch is actuated.
• To confi rm the selections made, simply quit this submenu by pressing
multifunction button ESC.
SKEMA 6
- OPERATING INSTRUCTION
) to set the current speed to the
) to set the current speed to
) with the micromotor withdrawn but
1:1
1:1
MAX
GB EN 119 119 119