Setting Dental Chair Positions 1, 2, 3 And 4; Emergency Stop Button; Foot Control; Multifunction" Foot Control - CASTELLINI SKEMA 6 CART Instructions De Service

5.1.3. Setting dental chair positions 1, 2, 3 and 4

This setting is specifi c for each operator.
Perform the following operations from the main screen:
• Bring the dental chair into the desired position with the manual movements
buttons.
NOTE: the position of the bowl can be saved, if powered.
• Hold button "SAVE" for at least 2 seconds to activate memory mode.
NOTE: a BEEP is given and an icon (A) appears on the top right-
hand side of the screen when memory mode is activated.
• Press button "1" or "2" or "3" or "4" to assign the position to the button
(e.g. 3).
NOTE: the icon (B) that refers to the selected program (e.g. 3)
appears on the display console to confi rm the position has been saved.
NOTE: to call up a set position simply briefl y press the button as-
signed to the relative position.

5.1.4. Emergency stop button

This button can be used in the event of an emergency to bring the patient
into the Trendelemburg position.
NOTE: the Trendelemburg position is already set and cannot be
changed.

5.2. Foot control

3 types of foot controls are available:
1

"Multifunction" foot control

2
"Push-pedal" foot control
3
"Power Pedal" foot control.
NOTE: the "pressure" foot control can also be supplied in a WI-
RELESS version.
5.2.1. "Multifunction" foot control
Description of the parts
[1] Handle
[2] Horizontally actuated control lever
[3] Joystick for dental chair movements
[4] Vertically actuated control
Control lever [2]
When the instruments are in place, the control lever [2] has 2 different
operating modes, depending on whether or not the pedal [4] is pushed
before hand.
NOTE: once the pedal [4] is pushed, the lever [2] must be actuated
within 5 seconds. The function is automatically cancelled once this time
has elapsed.
Operation with the instruments in place on the holder
• Lever [2] all the way to the right: dental operatory light on/off
Operation with the instruments in place on the holder after pushing the
pedal [4]
• Lever [2] all the way to the right: dental chair automatic return
• Lever [2] all the way to the left: patient rinse position retrieval. If the lever [2]
is pushed all the way to the left, the dental chair reaches the work position.
NOTE: these dental chair functions are activated by holding down
the pedal for at least 2 seconds.
SKEMA 6
- OPERATING INSTRUCTION
1 2
15:24
15:24
3
GB EN 107 107 107