Installing Power Supply; Switching The Instrument On And Off - Mettler Toledo SevenExcellence Serie Guide De L'utilisateur

3 Use the lock screw to attach the meter to the base
of the arm.

4.4 Installing power supply

Death or serious injury due to electric shock
Contact with parts that carry a live current can lead to death or injury.
1 Only use the METTLER TOLEDO AC/DC adapter designed for your instrument.
2 Keep all electrical cables and connections away from liquids and moisture.
3 Check the cables and the plugs for damage and replace damaged cables and plugs.
NOTICE
Danger of damage to the AC adapter due to overheating!
If the AC adapter is covered or in a container, it is not sufficiently cooled and overheats.
1 Do not cover the AC adapter.
2 Do not put the AC adapter in a container.
The instrument is operated using an AC adapter. The AC adapter is suitable for all supply line voltages ranging
from 100...240 V AC ±10% and 50-60 Hz.
1 Insert the correct connector plug into the AC adapter until
it is completely inserted.
2 Connect the cable of the AC adapter with the DC socket of
the instrument.
3 Install the cables in such a way that they cannot be
damaged or interfere with operation.
4 Insert the plug of the AC/DC adapter into a power outlet
that is easily accessible.
To remove the connector plug, push the release button and withdraw the connector plug.

4.5 Switching the instrument on and off

Switching the instrument on
1 Press the On/Off button.
The power button lights up green.
2 The instrument is initialized and a system test is performed. This process will take some time.
If only one user is defined, the instrument starts directly with the home screen without showing the login
screen.
Switching the instrument off
1 Tap Home > Log out > Shut down.
- or -
Press the On/Off button.
2 The instrument stops running tasks and shuts down. This process will take some time.
When the light goes out, the instrument is in the standby mode.
SevenExcellence™
WARNING
Putting into Operation​ ​ 19