SOUNDMASTER ELITE line ICD2200 Manuel D'instructions page 31

SETTINGS
•
Scan settings
Choose FM at first, it will go to a specific station playing. Then press "MENU" on the radio to get
above table.
By default, FM scans stop at any available station. This may result in a poor signal-to-noise ratio
(hiss) from weak stations. To change the scan settings to stop only at stations with good signal
strength, select "Yes" after choosing Strong station only.
•
Audio settings
All stereo stations are reproduced in stereo. For weak stations, this may result in a poor signal-
to-noise ratio (hiss). To play weak stations in mono, select FM weak reception: Listen in mono
only and then "YES".
Notice!
Improper operation can result in material damages!
Do not insert any recording media that deviate from the standard CD format (eg: mini-discs) into
the CD player. These may not be played and ejected correctly. Insert only one disc at a time
into the CD player.
Open the CD tray by pressing the "
inside. Close the CD tray with the "
functions will not work while the disc is loading. After reading the display shows the following
information in CD mode:
•
Time
•
Elapsed playback time in minutes
•
Track number
•
Playback status (playing/pause)
The Playback will begin automatically once the table of contents is read. The display will show
"No Disc" when the unit is set to CD mode and there is no CD inside.
•
To pause/resume playback of the CD, press the "
•
To switch to the next track, press the "
•
To fast forward through a track, press and hold the "
•
To switch to the previous track, press the "
•
To fast backward through a track, press and hold "
•
To stop CD playback, press the "
•
To eject the disc press in stop mode the "
CD
" button and put a disc (with printing side facing up)
" button. The display will say "Loading" and the disc
" button
" button once
" button twice
" button on the remote control.
" button on the unit.
10
ICD2200 / English Instruction Manual
" button.
" button.