CD Program
1. Set the unit in Stop mode
2. Press the "PROG" button on the remote control. The display will show "T01 P01" and "T01"
flash.
3. Choose with "
programmed and confirm the track by pressing the "PROG" button on the remote control.
The display changes to "P02".
4. To choose more tracks do step 3 again.
5. If all tracks are programmed press the "
programmed playback.
Repeat function
Press repeatedly the "REP" button on the remote control to select one of the following functions:
For Audio-CD:
• 1 x: The played track will be repeated.
• 2 x: The complete CD will be repeated.
• 3 x: The songs are played randomly.
• 4 x: Repeat function is deactivated.
For MP3-CD:
• 1 x: The played track will be repeated.
• 2 x: The complete folder will be repeated.
• 3 x: The complete CD will be repeated.
• 4 x: The songs are played randomly.
• 5 x: Repeat function is deactivated.
The icon of the selected function will be shown at the bottom of the display.
•
USB playback
From this point on, menus are generated from the folders on the USB
device.
The control functions are the same as in CD mode.
Select with the "
UNDOK app the desired folder. The display shows folder and file
names (not necessarily track names).
Once you have found a track you want to play, press the "
UNDOK app.
" or "
" or 0 to 9 on the Remote Control, the track which should be
" buttons on the remote control or by using the
/
" button on the unit or remote control to start the
USB
" button or click on the song title in
11
ICD2200 / English Instruction Manual