Streaming Audio Quality; Network Settings; Inactive Standby - SOUNDMASTER ELITE line ICD2200 Manuel D'instructions

2. STREAMING AUDIO QUALITY

You can set the quality of the radio stations.

3. NETWORK SETTINGS

•
Network wizard
Enter to search AP SSID, then input the WEP / WPA key or choose Push Button/Pin/Skip
WPS to connect to the wireless network.
•
PBC Wlan setup
Push Button Configuration, it is to connect the AP that supports WPS (Wi-Fi Protected
Setup).
•
View settings
View the information of current connected network: Active connection, MAC address, Wlan
region, DHCP, SSID, IP address, Subnet mask, Gateway address, Primary DNS and
Secondary DNS.
•
Manual settings
Choose wireless network connection and enable or disable DHCP (Dynamic Host
Configuration Protocol).
•
Network profile
ICD2200 remembers the last four wireless networks it has connected to, and automatically
tries to connect to whichever one of them it can find. From here you can see the list of
registered networks. You can delete unwanted networks by turning and pressing then
choosing "YES" to confirm delete.
•
Clear network settings
The adjusted network settings will be deleted.
•
Keep network connected in standby
If you choose to keep network in standby connected, the WiFi will
not disconnect even you are in standby, DAB, FM and Bluetooth
mode. Otherwise, the connection will only available in internet radio
mode.
However, it is recommended to maintain the connection for the use
of the UNDOK APP.
4. TIME/DATE
Set the time manually or automatically update, time format, time zone and daylight.

5. INACTIVE STANDBY

Set the time after the unit switch off automatically in standby.
ICD2200 / English Instruction Manual
14
®