Get The Network Environment Ready; Setup Wizard - SOUNDMASTER ELITE line ICD2200 Manuel D'instructions

Masquer les pouces

Table des Matières

Les langues disponibles

Make sure you have setup the wireless network and you have the WEP, WPA or WPA2 security

password to activate the connection.

You may also use the WPS (WiFi Protected Setup) function for easy pairing between the

network device and ICD2200. Check if the light indicators on the network device are in

appropriate status.

1. Language

Select the menu language

2. Private Policy

At the beginning of the first installation or after making a factory reset, the product privacy

policy will first appear on the display. To continue the installation, please confirm with the

"OK" button.

Further information are available under

3. Setup Wizard

Select "YES" to start the Setup Wizard.

4. Time/Date Display format

Select 12 or 24 as the time format.

5. Auto update

The time and date can be updated manually or automatically from DAB, FM or network.

Auto update works with data sent over DAB, FM or the Internet. The clock is only updated

when it is in a corresponding mode, so it is suggested to select a mode you use regularly.

DAB and FM use time signals broadcast with radio transmissions. Network uses a time

signal sent from the Internet radio portal when in any network connected mode.

6. Time zone/daylight

Set your time zone. If your country uses daylight saving and it is in effect, turn on the

Daylight saving option (only available when Auto update from Internet is selected).

7. Manual update

If you set No update, the wizard prompts you to set the time and date manually. The date

and time are displayed as dd-mm-yyyy and hh:mm.

The active value appears as flashing. Adjust each value with the "

value is set, press the knob to continue setting with next value.