Power Control; Adjust The Volume - SOUNDMASTER DAB750 Manuel D'instructions

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 16
Using AC power
Connect the power adaptor to the DC 9V socket on the unit.
 Slide the power switch to "ON" position then press the STANDBY button.
 The display will light up and the unit will switch on.
To turn the unit in STANDBY mode:
 Press the STANDBY button. The clock will continue to run whilst power switch at
the ON position.
Using battery power
Charging the battery
 Slide the power switch to "OFF" position.
 Connect the power adaptor to the DC 9V socket to the unit, than the wall power
socket.
 The charging LED indicator will light up in RED color.
 Slide the power switch to "ON" position then press the STANDBY button.
 The display will light and the unit will switch on.
Press the STANDBY button To turn the unit in STANDBY mode:
ENERGY SAVING/ ERP2 REGULATION
This device is equipped with an AUTOMATIC SWITCH OFF / STANDBY SYSTEM
for energy-saving requirements. This is regulated by an EU-standard and is
NOT A MALFUNCTION.

Adjust the volume

To adjust the volume from the top panel controls:
Press the "VOL -/+" button to increase or decrease the volume level.
Select a preset EQ sound effect
During play, press "EQ" button repeatedly to select:
[CLASSIC] [POP] [ROCK] [JAZZ] [Normal]
Clock setup
SET TIME/DATE: This main option enables the clock to be set manually if these is no
available DAB transmission.
To set the time and data manually:
In DAB or FM mode, press "MENU" button to access menu.
1.
Press "TUNE +/-" to scroll the menu options:
2.
[System]
System [Clock Setup]
3.
Set the Clock setup to Manual ( Defaulted at Radio )
Press "TUNE +/-" to set the clock
4.
To select an option, press "SELECT" button
5.

Power control

2
DAB750 / English Instruction Manual

Publicité

Table des Matières
loading

Table des Matières