Cleaning and care
4
Disconnect the power cord before cleaning or
leave the door open to deactivate the oven during
cleaning.
4.1 Cleaning the exhaust
filters
The oven ventilation exhaust filters should be re-
moved and cleaned often; generally at least once
every month.
To avoid risk of personal injury or
A
property damage, do not operate
oven hood without filters properly
in place.
Surface lights
Ventilation
filters
1. To remove the exhaust ventilation filters, slide
the filter to the rear. Then pull filter downward
and push to the other side. The filter will drop
out. Repeat for the 2nd filter.
32 / 37 EN
2. Soak the ventilation filters in hot water using
a mild detergent. Rinse well and shake to
dry or wash in a dishwasher. Do not use
ammonia. The aluminum on the
filter will corrode and darken.
3. To reinstall the exhaust ventilation filter, slide it
into the side slot, then push up and toward oven
to lock. Reinstall the 2nd filter using the same
procedure.
4.2 Surface light replacement
A
Front
1. Unplug the microwave oven or turn off power at
the main circuit breaker.
2. Remove the bulb cover mounting screws at both
light positions under the microwave.
Rear
3. Replace bulb with 30 watt appliance bulb.
4. Re-install bulb cover and mounting screw.
5. Plug the microwave back into the power supply
or turn the power back on at the main circuit
breaker.
Over The Range Convection Microwave Oven / User Manual
To avoid risk of personal injury or
property damage, wear gloves when
replacing the light bulbs.