get
ready
Unpack the box
Remote/phone
holder
Chair
Spare fuses (2)
Power cord
Phillips-head
6mm ball Allen wrench
screwdriver
CHOOSE A LOCATION
When deciding where to place your Super Novo, consider the following:
• Place the unit on a flat surface, away from direct sunlight or any other direct heat source (to avoid fading).
• If you wish to place the unit on a hard surface, it is recommended that you place a piece of carpet or a soft mat
underneath it to avoid damaging the floor (minimum 48" x 28").
• To accommodate the footrest when deployed, make sure the area in front of the chair is clear for at least 24".
• To ensure the chair does not hit the wall when reclining, make sure there is a 2" clearance behind it.
Clearance
2"
humantouch.com
Use and care manual
Concierge Card
Warranty terms
Bridge Redemption
250V, 5A
Delivery instructions
zip tie
Clearance
24"
4
CAUTION: To avoid injury to yourself and damage to the product, use two or more people to move the chair.
1. Person 1 grasp the inside of the headrest while person 2 folds the footrest up onto the seat and then grasps the front
of each side panel.
2. Person 1 push downward on the headrest to rotate the chair onto its mobility wheels while person 2 lifts up on the
front of the side panels.
3. Roll the chair on its mobility wheels to the desired location.
4. Gently lower the chair all the way to the floor.
Insert
WARNING: Dropping the front of the chair to the floor may damage the chair and/or floor.
Assembling your massage chair is easy!
Simply plug in the power
cord and you're set to go!
MOVE THE CHAIR TO THE DESIRED LOCATION
Person 1
5
Person 2