Connecting To An External Footswitch; When Connecting An Fs-5U; When Connecting Two Fs-5Us Or An Fs-6 - Boss LOOP STATION RC-30 DUAL TRACK LOOPER Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 43

Connecting to an External Footswitch

Connect your foot switch to the FOOT SW jack as shown in the illustration, and set its POLARITY switch.

When Connecting an FS-5U

Cable:
1/4" phone type
fg
1/4" phone type
When Connecting an FS-5U
* The FS-5L cannot be used.
Operation
Switch the
current track
Memory shift (up)
* If the current phrase has not been saved, that
phrase will be lost when you perform the memory
shift. For details on how to save a phrase, refer to
p. 10.
• If you perform the memory shift operation near the
end of the phrase, there may be cases in which the
shift-destination phrase memory will not be selected.
• You can also perform memory shift operations by
pressing the [ ] / [ ] buttons.
16
POLARITY switch
Explanation
Pressing the foot switch will switch
the current track.
Holding down the foot switch for two
seconds or longer switches you to the
next-numbered phrase memory.
If you press the foot switch during
playback, the newly selected phrase
memory number will blink in the
display, and the phrase memory
will be changed when the currently
playing phrase has ended.
When Connecting Two FS-5Us
or
When Connecting Two FS-5Us or
an FS-6
When you operate an FS-5U connected to the
white plug (stereo L side) or pedal B of an FS-6
The operation will be the same as when a single FS-5U is
connected.
When you operate an FS-5U connected to the
red plug (stereo R side) or pedal A of an FS-6
Operation
LOOP FX on/off
Memory shift
(down)
Switching the
LOOP FX TYPE
Cable:
Stereo 1/4" phone type fg
1/4" phone type x 2
Cable:
Stereo 1/4" phone type fg
Stereo 1/4" phone type
When Connecting an FS-6
or
MODE/POLARITY switch
Explanation
Pressing the foot switch will turn
LOOP FX on/off.
When you hold down the foot
switch for at least two seconds, the
previous-numbered phrase memory
will be selected.
To switch the LOOP FX TYPE, hold
down the B pedal of the FS-6 (FS-5U of
stereo L side) while you press (within
2 seconds) the A pedal of the FS-6
(FS-5U of stereo R side).

Publicité

Table des Matières
loading

Produits Connexes pour Boss LOOP STATION RC-30 DUAL TRACK LOOPER

Ce manuel est également adapté pour:

Loop station rc-30

Table des Matières