Remote Control Unit - Kenwood KRF-X9070D Manuel D'instructions

Names and functions of parts

Remote control unit

This remote control unit can be used not only for Kenwood products but also for other non-Kenwood products by setting the appropriate manufacturer's
setup codes.
1 Source keys (MD/TAPE, CD/DVD, DVD/
6CH, TUNER, VID1, VID2, VID3, AV AUX,
PHONO)
When press and hold for more than 3
seconds, they are used to select the
registered components.
Input Selector keys (MD/TAPE, CD/DVD, DVD/
6CH, TUNER, VID1, VID2, VID3, AV AUX,
PHONO)
When press and release in less than 3 seconds,
they are used to select the input sources.
2 SRC (
) Power key
source
Use to turn the other source components on
or off.
3 Numeric keys
Provide functions identical to those of the
original remote control supplied with the
component you are controlling.
Multi (multi control) %/fi keys
Use to control a variety of settings.
Use to operate other components.
P.Call @/# keys
Use for selection adjustments during sound,
set up and preset channel functions.
Enter key
Use to operate other components.
4 Return key
Use to operate the DVD component.
Exit key
Use to operate other components.
5 Disc Skip key
If CD is selected as the input source, this key
functions as the multi-CD player disc skip key.
Last/ A/B key
If TAPE is selected as the input source, this
is A and B deck of a double cassette deck.
Use to operate other components.
6 Disc Sel. key
Use to operate other components.
Input Sel. key
Use to operate other components.
7 CH +/– keys
Use to select the channels.
¢ / 4 keys
If CD, MD and DVD as the input source,
these keys function as skip keys.
8
TV Input key
Use when in TV operation.
9 TV VOL +/– keys
Use to adjust the TV's volume.
0 1/¡ keys
If CD, MD or Tape is selected as the input
source, this key functions as search keys.
TUNER
VID1
1
VID3
VID2
PHONO
POWER
RCVR
2
4
3
Multi
3
2
Enter
Multi
1
0
+ 10
4
RDS Disp.
5
Page
Return
Last / A/B
6 Exit
Disc Skip Menu
Disc Sel.
Input Sel.
+
¢
Tone
7
CH
8
Sound
4
–
9
– +
TV
TV Input
VOL
0
Tune – Band
!
Dimmer Auto
@
Info / Flip
#
$
Listen Mode
DSP
Stereo
Mode
%
·
Input
Active
THX
Mode
^
EQ
&
*
Tune – / + keys
¢
Use to operate the tuner mode.
! 8 key
Use to operate other components.
Dimmer key
Use to adjust the brightness of the display.
@ 3/8 key
·
If CD is selected as the input source, this
key functions as the play/pause key.
If MD or TAPE key is selected as input
source, this key functions as the play key.
¡
Band key
Use to select the broadcast band.
# 2 key
ª
If Tape is selected, this key functions as
reverse play key.
Info/Flip key
Use to operate other components.
$ Listen Mode 5/∞ keys
Use to select the listening mode.
% DSP Mode key
Use to select any of the DSP mode.
^ Active EQ key
Use to select ACTIVE EQ's setting.
& THX key
Use to switch the status of THX. fi
* Stereo key
Use to switch the listen mode to STEREO.
( LCD (Liquid Crystal Display)
)
TV key
Use to select the TV equipment.
¡ POWER RCVR (
receiver
Use to turn the receiver on or off.
™ TV Power key
Use to turn the TV on or off.
£ +100 key
Use to select the disc number with the
multi-CD player.
TV Mute key
Use to temporarily mute the TV sound.
¢ Page 5/∞ key
Use to operate the DVD component.
RDS Disp. key
Use to receive RDS broadcast.
PTY key
Use for PTY search.
(
DVD
CD
6CH
DVD
MD
AV AUX )
TAPE
TV
¡
™
5
6
7
£
8
¢
9
+ 100
∞
PTY TV Mute
OSD
Guide §
Mute ¶
•
+
ª
VOL
–
º
Bass
Boost
Tune +
⁄
Top Menu
¤
Setup
Loudness
‹
If the name of a function is different on
Speaker
EQ ›
the receiver and on the remote control,
the name of the remote control key in
fi
this manual is indicated in parentheses.
fl
∞ OSD (on screen display) key
§ Menu key
fl
¶ Mute key
• Tone key
•
ª VOL +/– keys
º Bass Boost key
⁄ ÷ key
fi
fi
∞
fl
¤ Loudness key
‹ Speaker EQ key
¡
) key
› 7 key
fi Learn key
º
fl Input Mode key
⁄
Use to operate the DVD component.
Guide key
Use to operate other components.
Use to operate other components.
Use to temporarily mute the sound.
Use to switch the status of TONE control.
Sound key
Use to adjust the sound quality and the
ambience effects.
Use to adjust the receiver's volume.
Use to select the maximum adjustment
setting for the low frequency range.
If MD or Tape is selected, this key
functions as record key.
If VCR is selected, this key functions as
record key when it pressed twice
sequentially.
Top Menu key
Use to operate the DVD component.
Setup key
Use to select the speakers' settings etc.
Use to switch the status of LOUDNESS.
Use to select SPEAKER EQ's setting.
If CD, MD, or TAPE is selected as the
input source, this key functions as the
stop key.
Auto key
Use to select the auto or manual tuning
mode.
Use to register other components.·
Use to memorize the operation of the
other remote controls.
Use to switch between the full auto,
digital and analog inputs.
w
∞
∞
fl
¢
∞
¡
∞
∞
•
q
8
7
EN