Connecting The Antennas - Kenwood KRF-X9070D Manuel D'instructions

Setting up the system

Connecting the antennas

AM loop antenna
The supplied loop antenna is for indoor use. Place it as far as possible
from the receiver, TV set, speaker cords and power cord, and adjust the
direction for best reception.
AM antenna terminal connections
1 Push lever. 2 Insert cord.
FM indoor antenna
The supplied indoor antenna is for temporary use only. For stable signal
reception we recommend using an outdoor antenna. Disconnect the
indoor antenna when you connect one outdoors.
FM antenna terminal connections
Insert cord.
FM outdoor antenna
Lead the 75Ω coaxial cable connected to the FM outdoor antenna into the
room and connect it to the FM 75Ω terminal.
ANTENNA
AM
GND
75
FM
Use an antenna
adaptor
(Commercially
available)
3 Release lever.
Attach to the stand
AM loop antenna
FM indoor antenna
FM outdoor antenna
19
EN