Section 3 − Definitions; Warning Label Definitions - Miller Unitor UWI 150 Auto-Line Mode D'emploi

Table des Matières

Publicité

3-1. Warning Label Definitions

A. Warning! Watch Out! There are possible
hazards as shown by the symbols.
1
Electric shock from welding electrode or
wiring can kill.
1.1 Wear dry insulating gloves. Do not touch
electrode with bare hand. Do not wear wet
or damaged gloves.
1.2 Protect yourself from electric shock by
insulating yourself from work and ground.
1.3 Disconnect input plug or power before
working on machine.
SECTION 3 − DEFINITIONS
2
Breathing welding fumes can be hazardous
to your health.
2.1 Keep your head out of the fumes.
2.2 Use forced ventilation or local exhaust to
remove the fumes.
2.3 Use ventilating fan to remove fumes.
3
Welding sparks can cause explosion or
fire.
3.1 Keep flammables away from welding. Do
not weld near flammables.
3.2 Welding sparks can cause fires. Have a
A
fire extinguisher nearby, and have a
watchperson ready to use it.
3.3 Do not weld on drums or any closed
containers.
4
Arc rays can burn eyes and injure skin.
4.1 Wear hat and safety glasses. Use ear
protection and button shirt collar. Use
welding helmet with correct shade of filter.
Wear complete body protection.
5
Become trained and read the instructions
before working on the machine or welding.
6
Do not remove or paint over (cover) the
label.
OM-220 340 Page 11

Publicité

Table des Matières
loading

Table des Matières