Operating Elements; Warning / Control Display - Kärcher B 300 RI LPG Mode D'emploi

4.1

Operating elements

4.2

Warning / control display

1 Driver seat
2 Brake pedal
3 Drive pedal
4 Function switch
5 Steering wheel
6 Warning / control display
7 Control lever
8 Parking brake
9 Engine speed potentiometer
10 Display lamp (waste container flap)
11 Water dispensing, side scrubbing deck
12 Water dispensing, roller brush
Note
All control elements will be described in detail later on.
Note
All warning and control lights will light up briefly when the
ignition is switched on, this is for testing the display lamps.
1 Display
* will be described in greater detail in the following
2 Indicator lamp for direction indicator
3 Indicator light Emptying waste container
4 Indicator light dirt water tank maximum level
5 Indication light fresh water tank minimum level
6 Indicator lamp for parking brakes
7 Hazard warning lights switch
8 Indicator light, minimum gas cylinder filling
9 Blind cover
10 Warning light sweeping mode
11 Indicator light Vacuum turbine on
12 Position light (only with road homologation)
13 Indicator lamp for dipper
4.2.1 Display
A Function key <Menu>
B Function key <up>
C Function key <down>
D Function key <save/confirm>
1 Display
Cool water temperature
Motor speed
Operating program
Battery voltage
Fuel tank level
Operating hour counter
2 Warning light, red (STOP)
Fault with multiple causes: engine is switched off
3 Indicator lamp (L1)
4 Engine control light (MIL)
Flashes briefly - temporary fault
The fault requires no further attention, as it is not per-
manently present
Lights up permanently - fault
8
-
EN 9